Stain Removal Station

Check the accessories when unpacking:

Spray gun (2 pieces) Air gun (1 piece) Degreaser cup (2 sets) Fluorescent lamp (1 piece) Circuit diagram (1 piece) Air pipe diagram (1 piece) Instruction manual (1 copy).

Installation instructions:

Open the degreaser cup, take out the mounting screws, install the gun holder, degreaser cup, and small countertop elbow behind the large countertop according to the position shown by the double-dot dash line in the gas pipeline diagram, and install the fluorescent tube.

Operation steps:

Insert the power plug into a mains (220V 50HZ) power socket with ground protection.

2. Press the power switch (ON) to turn on the power. At this time, the fluorescent tube is on.

3. Just step on the pedal to make the tabletop fan work.

4. There are two switches on the air gun, one is to control pressure air blowing, and the other is to control steam blowing, which can be selected according to the oil removal requirements.

5. Connect the air pump to the air filter and the steam hose to the steam source. Adjust the pressure of the air pressure gauge on the air filter to 0.3~0.4Mpa (it has been adjusted at the factory).

Things to note:

1. When using this product, absolutely reliable grounding protection is required to prevent electric shock.

2. When not working, turn off the power switch (OFF) and unplug the power plug when not in use for a long time.