Several Problem Solutions to Ensure the Washing and Drying Machine is in Good Operation

It is good for a washing machine to always maintain good working conditions, which can not only maintain a good washing effect but also greatly reduce the wear rate of the washing machine and the probability of accidents. So, how to ensure the good operating condition of the washing machine?

1. Clean the automatic drying controller of the washing machine regularly;

2. Check the tightness of the belt regularly. Use your thumb to be perpendicular to the midpoint of the tangent of the two pulleys, and then press down the belt. If the belt is stuck at 15-20 mm, it is normal;

3. Clean the steam pipes and filters on the cleaning line regularly, and check whether the steam trap works normally;

4. If the water pump on the cleaning offline boiler is out of service for more than one week, if it needs to be used again, the fan and motor impeller should be sent , and then the pneumatic operation should be carried out to prevent the motor from being flamed out and burned;

5. In order to ensure that the insulation materials of all steam pipes in the laundry room are normal, the steam hose should be replaced regularly to reduce heat loss and avoid burns;

6. When the solvent pump is working, do not lift the button collector to prevent the oil pump impeller from being stuck by the clothes entering the pipeline;

7. For electric washing machines, the value of the cooling pressure gauge should be zero. If it is greater than zero, the internal pressure should be eliminated in time.

2. During the use of mechanical equipment such as washing machines, some minor problems may occur even if you are not familiar with the instruction manual, which can be solved by random adjustments. Let's talk about the manufacturer of the washing machine.

1. When the washing machine is used offline, the door ring or washing box leaks: When used for the time, if there is a leak in these two places, you can check whether the washing machine door is closed tightly and whether there are foreign objects trapped; at the same time, it is good to use low-foam washing solvent when washing, and put too much in the washing box at one time;

2. Why can't you see water when washing clothes: Many people are curious about why you can't see water when washing clothes with a washing machine. In fact, the main washing principle of the washing machine is to beat it when it is turned on. If there is too much water, it will not only waste water resources but also make the washing machine unable to effectively beat the clothes, greatly reducing the washing effect. However, the water consumption increases during the process of passing the line, so don't worry too much;

3. The equipment shakes back and forth during dehydration: Before using the washing machine, check whether its full suspension shock absorption system is normal. If it is not normal, there may be shaking.